Rail Guides
From Rocketpedia
Contents |
Material
- Each rail guide is made from Delrin, see Material Specification for details.
Design
- ==== Solid Works Model ====
SolidWorks model of the rail guide.
- picture
- SolidWorks Model
- eDrawing
- ==== Solid Works Drawings ====
SolidWorks drawing of the rail guide.- SolidWorks Drawing
- eDrawing
- document
Mounting
Rail guides will be mounted in pairs both at the forward end of the booster, and at the aft end. Mounting will be done with 1/4 X 20 screws into mount points on the booster. Actual location is TBD.
Stress Analysis
The following reports shows that this design of rail guides provides a Safety Factor of 30 for the expected loads and stresses on the guides.
Stress Analysis Report (.htm) [1]
